Procedure for changing your battery

• First unscrew the screws from the base that may hold the battery or the top of the brackets if it is a Japanese or Korean car.
• Then unscrew the terminals from the poles, always starting from the negative and remove them by pulling them away from each other.
• Remove the old battery carefully.
• Clean the battery base and the cable terminals with a wire brush, especially the terminals that rest on the poles.
• Put the new battery in place, making sure the poles are in the same direction as the previous one.
• Screw the cables to the poles starting from the positive.
• Screw the support base well.
• It is good if you have, to apply a special protective spray on the poles, to avoid corrosion later.